• Zinc soaps of unsaturated fatty acids
• Light coloured pastilles

Packaging: 20 kg bags
Density: 1050 kg/m³
Melting point: 100 °C
Dosage: 1 - 5 phr

• Reduces compound viscosity and gives better flow properties with internal lubrication
• Not suitable for halogen-containing elastomers

• Soaps of unsaturated fatty acid derivates (mainly zinc soaps)
• Beige pastilles

Packaging: 20 kg bags
Density: 1160 kg/m³
Dropping point: 85 °C
Dosage: 1 - 5 phr

• Reduces compound viscosity and increases flow properties and internal lubrication
• Suitable for use in softer compounds or compounds with low mixing temperatures

• Blend of fatty acid derivates (mainly zinc soaps)
• Yellowish pastilles

Packaging: 20 kg bags
Density: 1070 kg/m³
Dropping point: 95 °C
Dosage: 1 - 3 phr

• Excellent flow promoter for compounds with high level of white fillers (silica, chalk, clay, etc.)
• Process additive for all kinds of non-halogenated polymers
• Improves dispersion of fillers (especially minerals fillers) and has beneficial influence on batch-to-batch uniformity
• Decreases the tendency of re-agglomeration of silica

• Zinc soaps combined with fatty acid esters and inorganic dispersing agent
• Beige pastilles

Packaging: 20 kg bags
Density: 1100 kg/m³
Dropping point: 103 °C
Dosage: 3 - 5 phr

• Fast incorporation and improved dispersion of silica, highly reinforcing fillers and also inactive fillers
• Especially suitable for tire tread compounds where fast mixing and good batch off handling is required

• Mixture of soaps and fatty acid esters
• Beige pastilles

Packaging: 20 kg bags
Density: 1060 kg/m³
Melting point: 65 °C
Dosage: 1 - 3 phr

• Improved extrusion rate and reduced mill roll sticking
• Dispersing effect on silica fillers leading to viscosity reduction and improved flow
• Reduced tan d in silica filled compounds

• Blend of calcium soaps and amides of saturated fatty acids
• Light yellowish pastilles

Packaging: 20 kg bags
Density: 1000 kg/m³
Melting point: 102 °C
Dosage: 1 - 3 phr

• Process additive for nearly all kinds of polymers, especially good for mould flow and release
• Improves the surface finish of vulcanisates
• Has stabilising properties in CR blends